Unsolved
2 Intern
•
132 Posts
0
123
February 20th, 2024 11:44
Use IPMItool with replaced controller
Hi all,
We have follow this tutorial to replace a faulty Unity controller.
https://www.youtube.com/watch?v=uOPNMiZ9m6E
After swapping controllers we are not able to access SOL (Serial Over Lan) port using IPMITool due to an incorrect password so I suspect the password is associated to the controller not to the system. As this is a replacement unit we don't have the IPMI password that usually appears on the front label of the cabinet. Does anyone have any procedure to recover SOL password?
No Events found!
DELL-Sam L
Moderator
•
7.5K Posts
0
February 20th, 2024 18:04
Hello jtejada.ralco,
Here are a couple of links that maybe of assistance.
https://www.dell.com/support/kbdoc/en-us/000022376
https://www.dell.com/support/kbdoc/en-us/000022355/dell-emc-unity-how-to-change-unlock-reset-the-admin-or-service-passwords
jtejada.ralco
2 Intern
•
132 Posts
0
February 27th, 2024 08:40
Hi @DELL-Sam L
What we don't have is "Unity_serial_number" or "console" password to access ipmi
DELL-Sam L
Moderator
•
7.5K Posts
0
February 27th, 2024 14:51
Hello jtejada.ralco,
You will need the serial# or the service tag in order to change the password.