Unsolved
2 Posts
0
456
February 25th, 2023 05:00
Unity XT 380 Traditional Pool Create Error
Problem: On the disk unit interface screen, 8 out of 12 disks appear, and 4 are missing.
#1 After upgrading to OE revision code 5.2 there are 4 disks drives showing missing.
#2 Unable to create Traditional Pool
Would you help me with this topic?
No Events found!
burakcansari
2 Posts
0
February 27th, 2023 01:00
Thanks for your answer.
Yes, I am using the CLI when creating a traditional repository. I can't use the other 4 disks while creating a traditional pool.
How can I use these system disks? Can't I use it at all? It doesn't matter if it's a traditional pool or a dynamic pool. I want to use those 4 disks.
DELL_ChrisHolloway
2 Intern
•
125 Posts
1
February 27th, 2023 01:00
In OE 5.2, from the GUI, only dynamic pools can be created. If you still want to create a traditional pool, then that could be done from the CLI.
As for the 4 "missing" disks, I'm going to assume that's your system drives, and those system drives are either SAS or NLSAS disks. HDD system drives cannot be added to a dynamic pool, which is likely why they are not showing as available.