11 Posts
0
813
November 17th, 2021 04:00
Multiple RP clusters to 1 Unity splitter
Hello,
When I zone an RPA on a Unity splitter that already has another RPA (different cluster) attached to it, the Unity sees it as ONE host.
The initiators of the new RPA are automatically added to the existing Recoverpoint host on the Unity.
This is not what I want, the new RPA is a separate RP cluster and has nothing to do with the RP cluster, and all added LUNS, already on the Unity.
How can this be solved? Is there a way to add the RPA manually before it is automatically added?
Thanks!
No Events found!
10GB7200
11 Posts
0
November 29th, 2021 06:00
I have received an answer.
Registering multiple RP clusters as separate hosts instead of all RP clusters as one and the same, unfortunately is not possible.
By design, all RPA’s are registered under ONE Recoverpoint host. No true multitenancy for separate RP clusters.
So pay attention > All clusters can see and use each other's LUNS.
DELL-Sam L
Moderator
•
7.5K Posts
0
November 17th, 2021 12:00
Hello 10GB7200,
Here are a couple of kb that maybe of assistance. https://dell.to/3non4dE
https://dell.to/3Dtfy75
10GB7200
11 Posts
0
November 18th, 2021 03:00
Hello Sam
Thank you for your answer. These kb's are unfortunately not about the described problem and do not solve it.
Is it not possible to temporarily disable auto registration of hosts so that I can register the RPA manually?
Thanks!
DELL-Sam L
Moderator
•
7.5K Posts
0
November 19th, 2021 15:00
Hello 10GB7200,
What is your current version of recovery point?
10GB7200
11 Posts
0
November 22nd, 2021 01:00
Hello Sam,
All RPA's running v5.1.SP4.P1
DELL-Sam L
Moderator
•
7.5K Posts
0
November 22nd, 2021 14:00
Hello 10GB7200,
Have you tried to do the steps list in this kb under Unisphere for RecoverPoint?
https://dell.to/3HKXffX