1 Rookie
•
19 Posts
0
388
November 13th, 2022 06:00
Dell PowerStore NAS/ISCSI Port
Hi, Everyone
- In the PowerStore 1000T, the 0.1-inch 4-port card is configured as LACP/LAG.
question here
1. Should port 0.1 be used only for NAS? Or can it be used with iSCSI?
2. Is there only ports 2 and 3 for iSCSI?
3. Can I set up NAS and iSCSI on ports 0 and 1 at the same time?
I need help.
Thanks,
No Events found!
DELL-Josh Cr
Moderator
•
9.2K Posts
0
November 14th, 2022 06:00
Hi,
Thanks for your question. You should be able to use either protocol on any port. Page 14 https://dell.to/3EdEUrg It is probably better to keep them separate but it should work.
Let us know if you have any additional questions.