Start a Conversation

LEE888

1 Rookie

•

59 Posts

0

49

December 22nd, 2025 05:44

iDRAC Critical Error PCI1318 and PCI1360

Hi Team,

Would like to know what is the cause of this issue ?

Thank you

2025-12-22 02:47:43	1050	PCI1318	A fatal error was detected on a component at bus 94 device 0 function 0.
2025-12-22 02:47:41	1049	PCI1360	A bus fatal error was detected on a component at slot 2.

Responses(3)

DELL-Erman O

Moderator

•

2.9K Posts

0

December 22nd, 2025 10:23

Hi,

Mostlikley it may related with a network card. like BCM5719 you can try to below torubleshooting steps and check it again.

- Make sure the device, BIOS, and iDRAC have the latest firmware.
  - Turn off the server completely (AC power off), then turn it back on.
  - Ensure all cables are properly connected.
  - Remove the card on slot 2 and reinstall it.
    - Disable slot 2 in BIOS or move the card to a different PCIe slot for testing.
    - If the problem follows the card, consider replacing it.

Hope that helps!

LEE888

1 Rookie

•

59 Posts

0

December 23rd, 2025 10:25

Hi @DELL-Erman O - do you know which one is slot 2 in OEMR XL R640

Thank you

DELL-Erman O

Moderator

•

2.9K Posts

0

December 23rd, 2025 11:37

Hi,

I found R640 expansion card guidelines https://www.dell.com/support/manuals/en-us/poweredge-r640/per640_ism_pub/expansion-card-installation-guidelines?guid=guid-98474365-a5ff-4468-8960-a4f7ac4fb2c5&lang=en-us#:~:text=NOTE:The%20expansion%20card%20slots%20are%20not%20hot%2Dswappable.,with%20the%20highest%20priority%20should%20be%20installed This guide may helpful.

View All

No Events found!

Top