Dell/EMC PowerEdge R450 - Load SCP (Server Configuration Profile) XML from USB FAT-32 Formatted Drive

Does the iDRAC9 in the 14th/15th Gen Dell/EMC PowerEdge allow one to load the SCP XML file onto a FAT-32 formatted USB drive and connect it (via an adapter) to the Micro-USB A port on the front of the server (like the USB-C port on the front of the 17th gen)?

17th Gen / iDRAC10 Guide to this process:

https://infohub.delltechnologies.com/sv-se/p/idrac10-direct-usb-access-for-full-poweredge-server-control/

https://www.dell.com/support/manuals/en-ie/idrac10-lifecycle-controller-v1-xx-series/idrac10_1.xx_ug/importing-server-configuration-profile-from-a-usb-device?guid=guid-735c87ee-0eff-40b4-843d-6d449e3e1aaa&lang=en-us

There is one other Community post about someone trying to do this:

https://serverfault.com/questions/1168407/idrac-9-14th-gen-server-config-profiles-via-usb/1192541#1192541 

And, to connect a FAT32 32GB USB Mass Storage device (thumb drive) to a 14th/15th gen PowerEdge, would one need to use a a Micro-USB-A to USB-A (Male) adapter (cable) ?

Because as far as I know, the USB-A port on the front of the sever is not connected to the iDRAC (but maybe it can be toggled?).  Only the Micro-USB-A port.