Unsolved
This post is more than 5 years old
65 Posts
0
1415
April 3rd, 2012 23:00
What is "High Rx Power Warning" in the SAN Switch?
I am noticing some alerts "High Rx Power Warning" on the syslog daily.
The interface fc1/9 is connected to one of the Front-end port in the Symmetrix DMX Storage Array.
No Events found!
Amita2
93 Posts
0
April 9th, 2012 00:00
Hi,
Did you check interface fc1/9 on your switch ?
Regards
Amita
GEMC
36 Posts
0
April 9th, 2012 19:00
If you are using Cisco MDS switch, you can run the command "#show interface fc1/9 transceiver details" to gather the SFP diagnostics information details. Please check Rx Power values from the output.