This post is more than 5 years old
2 Intern
•
217 Posts
0
1849
January 9th, 2011 23:00
Support Matrix for OR
Do we have support Matrix which show which is the minimum and latest levels supported for Open Replicator for data migration from third party array(HDS) to EMC Clariion, DMX etc...
No Events found!
sauravrohilla
859 Posts
0
January 10th, 2011 23:00
This is the list of all supported Arrays with ORS. You can check you model number.
NEC Symmetrix VMAX
EMC CLARiiON: AX100, CX200, CX3-40c/CX3-20c, CX3-80/CX3-40(F)/CX3-20(F), CX300, CX4-120/CX4-240/CX4-480/CX4-960, CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8, CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6, CX600/CX400, CX700/CX500, FC4700;
EMC Celerra: NS-120 (Native Block), NS-480 (Native Block), NS-960 (Native Block)3, 4;
EMC Symmetrix: 8000 Series2, DMX-38, DMX-48, DMX/DMX-2, VMAX;
Hewlett Packard StorageWorks: EMA12000, EMA16000, EVA3000, EVA4000, EVA5000, EVA6000, EVA8000, MA8000, XP-10000, XP-1024, XP-12000, XP-128, XP-48, XP-512;
Hewlett Packard SureStore XP-256;
Hitachi HDS: 9910, 9960, 9970V, 9980V, 9990, TagmaStore NSC55, TagmaStore USP100, TagmaStore USP1100, TagmaStore USP600, Thunder 9520v, Thunder 9530v, Thunder 9570v, Thunder 9585v;
IBM DS: 4100, 4300, 4400, 4500, 6800, 8100, 8300;
IBM ESS: 800, 800T, E10, E20, F10, F20;
IBM FastT: 500, 600, 700, 900;
IBM SVC;
NEC Symmetrix: DMX-48, VMAX;
Sun StorEdge: 9910, 9960, 9970, 9980, 9985, 9990
NEC Symmetrix VMAX
The Microcode fix is 52900 Rev2
The Solution Enabler hot fix is v7.1.2.2-1059
sauravrohilla
859 Posts
1
January 10th, 2011 14:00
What is the model of your HDS? I know it can migrate data between HDS 9960 and Symm. and ORS can only be use to migrate the data between a Symm and XYZ array. But one side has to be Symmetrix which acts as a control.
Thanks,
Saurabh
modaslam
2 Intern
•
217 Posts
0
January 10th, 2011 22:00
modaslam
2 Intern
•
217 Posts
0
January 11th, 2011 23:00
thank you Saurabh.
Where do we get the details is it there in Elab Navigator, because I need to get the details for Clariion too.