Unsolved
This post is more than 5 years old
7 Posts
0
473
November 18th, 2011 13:00
Solutions Enabler upgrade from 7.0 to 7.3.0.5
Folks, I am trying to upgrade solutions enabler from 7.0.1 to 7.3.0.5. Wondering if anyone has come across any issues/road blocks during or after the upgrade. Appreciate your inputs and suggestions.
Thanks,
RP
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
November 18th, 2011 14:00
are there application such as ECC/SPA/SMC running on the same host ?
rpakanati
7 Posts
0
November 21st, 2011 07:00
We have 3 servers
1) ECC server
2) Solutions Enabler
3) Repository
rpakanati
7 Posts
0
November 21st, 2011 08:00
We haven't installed either SMC or SPA but we do have ECC v6.1.0.5 .
dynamox
9 Legend
•
20.4K Posts
0
November 21st, 2011 08:00
take a look at ECC release notes, existing symmetrix agent, WLA agent may not support the newer version of Solution Enabler.
dynamox
9 Legend
•
20.4K Posts
0
November 21st, 2011 09:00
UB11 supports SE 7.3.0.5 and later ..the question is whether UB5 will support that same version.
rpakanati
7 Posts
0
November 21st, 2011 09:00
Dynamox, which release notes were you meaning? I was referring to the UB11 read me and I do not see the Symm agent and WLA agent pre -req's? I am a bit confused with the Symm/WLA agent compatibility with Sol Enabler 7.3.0.5. For us to upgrade to the UB11, the min req for SE should be at 7.3.0.5. Please advise.
Thanks,
RP
dynamox
9 Legend
•
20.4K Posts
0
November 21st, 2011 09:00
that's a really old version, symm agents may not work with SE 7.3
rpakanati
7 Posts
0
November 21st, 2011 10:00
The actual problem started with the WLA automation for performance reports. It wasn't populating the metrics at a granular level and the EMC support recommended that we upgrade ECC from UB5 to UB11. But the dependency is SE, which is at 7.0.1 and we need to upgrade it to 7.3.0.5 as well. After the SE upgrade we are planning to uprade ECC to UB11.
Many thanks for the suggestions.
RP