This post is more than 5 years old
31 Posts
0
1009
February 5th, 2013 21:00
PPME Migration
We are just planning for a migration.. What all are the checklist that should be done before migration .. We planning to go for PPME ( host based) migration.
No Events found!
sauravrohilla
859 Posts
0
February 6th, 2013 00:00
1) PPME Service is installed on the host?
2) PPME licenses are acquired?
3) PP must be able to see the target and source LUNs.
4) Cluster service is disabled (in case the source lun is a clustered resource).
5) read the PPME host copy whitepaper
regards,
Saurabh
Zikas
278 Posts
1
February 6th, 2013 00:00
In addition to what Saurabh said two REBOOT are required!!!!!!
Zikas
278 Posts
0
February 6th, 2013 01:00
Then Saul you need only one reboot
Saul_K
31 Posts
0
February 6th, 2013 01:00
Thanks for the reply .. but why the 2 reboot required ? We alredy have the host with powerpath and migration enabler installed..
Saul_K
31 Posts
0
February 6th, 2013 01:00
Yankees,
U scared me!!!
Thanks 
dynamox
9 Legend
•
20.4K Posts
1
February 6th, 2013 03:00
read admin guide to understand what needs to be done for specific OS
PowerPath Migration Enabler 5.6 User Guide