Unsolved
This post is more than 5 years old
23 Posts
0
695
June 1st, 2013 00:00
Need help on SRDF STAR
We have a STAR SRDF setup. We wanted to remove adevice from star RDFG group. However, it went into failed over state.With R21 device state as RW.
Afetr masking the R1 device the device pair went into the slit state. As a part of troubleshooting, we changes the status of all devices of DRFG as Split. Now we are not able to establish the RDFG.
Please suggest a solution.
No Events found!
sauravrohilla
859 Posts
0
June 3rd, 2013 04:00
So you are saying that you had made changes to the rdfg using the symrdf commands and the devices were part of STAR at that time? This is a not a good practice to use symrdf command when the devices are under star control. You probably want to open a support ticket now and let EMC tell you the correct procedure to fix the star.
Would it be possible for you to paste the symrdf query and symstar query output here?
regards,
Saurabh
vivekjaiswal003
10 Posts
0
June 4th, 2013 02:00
HI,
I wud normally try resuming ( re establish ) the R1-R21 first , once in sync , i will start the R21-R22 est. Please let us knw if that works ?
Cheers,
Vivek