Unsolved
This post is more than 5 years old
1 Message
0
597
September 2nd, 2014 01:00
I have a question about what are differences operation steps between M/F and Open System when symclone activate with prompt option start in VMAX Storage
Hi, This is Jimmy from Korea.
I have a question about what are differences operation steps between M/F and Open System when symclone activate with prompt option start in VMAX Storage.
Because, Open Sytem is about 2.5 times longer than M/F when symclone activate excute after prompt action reply.
It takes 4.7 seconds in Open System while M/F takes 1.7 seconds.
Pls, Let me know how to reduce symclone activate time in Open system likes M/F.
No Events found!
Jeffey1
4 Operator
•
2.8K Posts
0
October 21st, 2014 02:00
Hi Jimmy,
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Symmetrix Support Forum" which would be the most relevant for this question.
AlanZ1
790 Posts
0
October 27th, 2014 10:00
Your question has been moved into a product community where it has a better chance of being seen by the correct audience.
PedalHarder
3 Apprentice
•
465 Posts
0
October 28th, 2014 21:00
Are you making an apples for apples comparison?
i.e are the device counts the same in both tests? are they re-activate or activate? What is the FA CPU% busy on the FA that house your GK's?