This post is more than 5 years old
1 Rookie
•
13 Posts
0
999
December 2nd, 2014 11:00
How to change DMX director type from FibreChannel to RDF ?
How to change DMX director type from FibreChannel to RDF ?
No Events found!
This post is more than 5 years old
1 Rookie
•
13 Posts
0
999
December 2nd, 2014 11:00
How to change DMX director type from FibreChannel to RDF ?
Top
M_Salem
213 Posts
2
December 2nd, 2014 11:00
Hi Abdelkrim,
Welcome to the community,
You can achieve this only via BIN file change, Only VMAX arrays running code 5876 support this change via software.
Hope this helps
Mohammed Salem
Allen Ward
4 Operator
•
2.1K Posts
0
December 2nd, 2014 11:00
We ran into this as well and it is most definately a BIN file load to make the change. So if you have any other config changes that might require a BIN load it might be a good time to batch them up to save on costs (and config lock time).
dynamox
9 Legend
•
20.4K Posts
0
December 2nd, 2014 12:00
And don’t forget you will lose one port on the same CPU.
Abdelkrim1
1 Rookie
•
13 Posts
1
January 15th, 2015 06:00
Thanks for your help