error when doing a stordaemon reload

when I do a  "stordaemon action storevntd -cmd reload" command I get an error message in storevntd log.  Here is what the log shows. I don't know if that error is refering to the line above it (which seems to be comming from Unisphere setting, rather than daemon_options) or not.  Is this something I should be worried about?  BTW I xx'ed out most of the real IP addresses-- the log doesn't really say 1.xx.1.xx.2.xx.1.xx. 

        [3364              Conn-107] Dec-13 15:07:00.274 : Option setting: snmp_trap_client_registration = 1xx.1xx.2x.1xx,162,10,ACTIVE

                  1xx.1xx.1xx.1xx,162,10,ACTIVE

        [3364              Conn-107] Dec-13 15:07:00.274 : Option setting: snmp_host            =

[3364              Conn-107] Dec-13 15:07:00.274 : [OSLProducer::evtd_oslpAction] Could not recognize the action.  [reload 0]: Symapi code 0

        [3364              Conn-107] Dec-13 15:07:00.274 : Option setting: log_event_targets    = snmp file

        [3364              Conn-107] Dec-13 15:07:00.274 : Option setting: log_symmetrix_events = status,events,tgt=snmp file;1114,ignore

[3364              Conn-107] Dec-13 15:07:00.305 : Action cmd 'reload' received (listed above)

stordaemon exited on cpw1p6200 with error code 0.