Enginuity Compatibility

Launch E-Lab Interoperability Navigator

Thx.

I'm a bit lost still.  Ran the interop navigator, and everything I've tried still doesn't show me what Symm codes will run with which Solutions Enablers.  I guess I don't know which 'path' to run down once the navigator starts.

yeah, i could not find a good combo of objects either. Another option is to look at the release notes

Home > Support > Technical Documentation and Advisories > Software ~ S ~ Documentation > Solutions Enabler

ohh..you'll like this one

https://elabnavigator.emc.com/vault/pdf/EMC_VMAX_ESSM.pdf

https://elabnavigator.emc.com/vault/pdf/EMC_DMX_ESSM.pdf

Surprise, surprise, surprise!   The release notes have a section discussing which Enginuity codes the Solutions Enabler rev supports.  It directs you back to ELab Navigator which is no help.  Not surprising at all.  Wow. 

go easy on the caffeine there Scott

I'm In An Endless Loop draining all the CPU power and memory cycles from the Powerlink website!!!!!!!!!!!!!!!!!!!!

https://elabnavigator.emc.com/vault/pdf/Software_Enabler.pdf

My powerlinkFU must be strong; actually it was easy.

"Solutions Enabler versions required for Enginuity levels"  emc201214

• Enginuity 5771 requires a minimum version of Solutions Enabler 6.2. However, it is recommended that you use version 6.5 or above due to fixes included in the later revisions of the software. See the latest Release Notes for details.  Reference emc120125 for what version of EMC mainframe software products are required for 5771.
    
• Enginuity 5772 requires a minimum version of Solutions Enabler version 6.4. However, it is recommended that you use version 6.5 or above due to fixes included in the later revision of the software. See the latest Release Notes for details. Reference emc158134 for what version of EMC mainframe software products are required for Enginuity 5772.
    
• Enginuity 5773 requires a minimum version of Solutions Enabler 6.5.  Reference  emc183935 for what version of EMC mainframe software products are required for Enginuity 5773.
    
• Enginuity 5874 requires a minimum version of Solutions Enabler 7.0.  Reference emc213135 for what version of EMC mainframe software products are required for Enginuity 5874.
    
• Enginuity 5875 requires a minimum version of Solutions Enabler 7.2.  Reference  emc267712 for what version of EMC mainframe software products are required for Enginuity 5875.

Powerlink is SUCH A JOKE!!!!!  USELESS!!!!!!!!!!!!!!

Wait........wait, wait, wait, wait, wait.  Did.....????  Huh????  What just happened?????  Where am I?

I give up.  Rack this one up on my long list of powerlink search failures.

I'm surprised Powerlink isn't a Las Vegas venue. 

People making bets on how long it will take for someone to find the real answer they are looking for.

you are welcome