Unsolved
This post is more than 5 years old
51 Posts
0
366
October 16th, 2013 03:00
DMX-3/DMX-4 FC ports vs Processor table
The DMX-4 product guide mentioned that there are:
1. Eight data port per I/O director
2. Four dual 1.3 GHz processor complexes per director
Is there anywhere I can find information on which port maps to which processor? This kind of information would allow me to isolate performance problem when the some frontend ports or processors gets too busy and I want to avoid provisioning additional LUN via the port associated with busy processor.
No Events found!
christopher_ime
2K Posts
0
October 16th, 2013 21:00
Firstly, welcome to the forums, and above all, thank you for being an EMC customer.
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Symmetrix Support Forum".