Unsolved
This post is more than 5 years old
13 Posts
0
901
October 6th, 2011 03:00
Cuncurrent SRDF
Hello,
Could someone help me with giving useful information or document regarding configuration of concurrent SRDF.
I have 3 Symms with SRDF/S. At the moment there is synchronous replication between two of them, but will have to add the 3rd one and configure concurrent SRDF. Thanks in advance. It is all DMX
No Events found!
vasil_yosifov
13 Posts
0
October 6th, 2011 06:00
Consider that S1 will replicate to S2 and S3
SKT2
2 Intern
•
1.3K Posts
0
October 6th, 2011 06:00
consider S1, S2 and S3 are the frames, will the S3 be connected to S1 or S2? What is the purpose of the S3 here?
SKT2
2 Intern
•
1.3K Posts
0
October 6th, 2011 07:00
check if both "swicthed RDF" and "concurrent RDF is enabled on the arrays. Also what i remember is you cant setup two SRDF/S sessions from same source to two targets ( one can be srdf/s and other srdf/a)
dynamox
9 Legend
•
20.4K Posts
0
October 6th, 2011 07:00
thats is not correct, both can be SRDF/S
sauravrohilla
859 Posts
0
October 6th, 2011 11:00
Yes both legs can be Synchronous, I think this was introduced in 5874 if I am not wrong?
Dynamox do you know when this was introduced or is it available in DMX also?
regards,
Saurabh
sauravrohilla
859 Posts
0
October 6th, 2011 12:00
thanks,
dynamox
9 Legend
•
20.4K Posts
0
October 6th, 2011 12:00
i am doing it on DMX4 (73)
vasil_yosifov
13 Posts
0
October 6th, 2011 22:00
Thanks guys, but could you provide me with some documentation or useful links for configuring Concurrent SRDF. I know it is possible sync sync, but need some technical details how to configure it. Thanks in advance.
Fenglin1
4 Operator
•
2.1K Posts
0
October 9th, 2011 20:00
You can go to powerlink powerlink.emc.com and download the Solution Enabler SRDF Family CLI for reference
Home > Support > Technical Documentation and Advisories > Software ~ S ~ Documentation > Solutions Enabler > v7.3.x -> Solutions Enabler Symmetrix SRDF Family CLI 7.3 Product Guide