This post is more than 5 years old
53 Posts
0
741
January 11th, 2013 01:00
Create an alarm
Hi,
I would like to control the usage of my Symmetrix ports. I am suspecting that at some point of time, the usage rises over 90% in some of the ports but I don't know exactly when. I would like to create an alarm so that when the usage is over a threshold (eg. 85%) Symmetrix sends me an email or anything else. Can anyone explain to me how to configure that? I have a Symmetrix 20K.
Thanks
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
January 11th, 2013 04:00
EMC Control Center. Login into SPA and look at Administration > Thresholds/Alerts
zgz_rever
53 Posts
0
January 11th, 2013 04:00
Hi dynamox,
Yes I have Symmetrix Performance Analyzer. What is ECC?
dynamox
9 Legend
•
20.4K Posts
0
January 11th, 2013 04:00
do you have SPA/ECC ? Very easy to do that in those two products
zgz_rever
53 Posts
0
January 11th, 2013 05:00
Thank you Dynamox.
Last question, I have just created the alarm but, how can I define what to do with the alarm? I would like it to be sent to my email, is that possible? Where can I configure that?
Thanks
Zikas
278 Posts
1
January 11th, 2013 07:00
Hi zgz_rever
Configure the Email addresses in SMC, as follows:
The Configure Email Address dialog opens.
Refer to the SMC help for assistance with this dialog box.