This post is more than 5 years old
29 Posts
0
1578
January 21st, 2013 13:00
attributes for srdf/star
Is it mandatory to set dyn_rdf attribute for the STD devices involved in the srdf/star ??
Is there any option to enable the attribute=dyn_rdf by default when we create a device??
No Events found!
codyhosterman
286 Posts
0
January 21st, 2013 15:00
Yeah you definitely need that set. The symstar setup process will fail if the devices are not set to be dynamically RDF1 or RDF2 capable.
dynamox
9 Legend
•
20.4K Posts
0
January 21st, 2013 13:00
symconfigure
create dev count= ,
size = [MB | GB | CYL],
emulation= ,
config=
[, data_member_count= ]
[, remote_config= ,
remote_data_member_count= ,
ra_group= , [remote_mvs_ssid= ],
[dynamic_capability =
[dyn_rdf | dyn_rdf1_only | dyn_rdf2_only ]]
duggivarun
29 Posts
0
January 21st, 2013 14:00
i am asking whether is it necessary to set particular attribute for a device involved in srdf ???
dynamox
9 Legend
•
20.4K Posts
0
January 21st, 2013 14:00
i don't have experience with start but looking SRDF/Start operations chapter i see R1's and R2 ..that tells me you have to have that attribute.
ChanduReddyEMC
13 Posts
0
January 21st, 2013 20:00
Hi,
Dynamic_capability Option is mandatory for the devices to participate in SRDF operations. whether SRDF/S or A or STAR.
duggivarun
29 Posts
0
January 22nd, 2013 04:00
If the device is a meta device. do we need to enable this dynamic_rdf option on each and every meta member or enabling on meta head will do ???
Archuperi721
110 Posts
0
January 22nd, 2013 04:00
Its better you create all the hypers with dynamic feature so you don’t need to worry about it at later point.
Regards,
Periyakaruppan N (Peri),
Avinash V
91 Posts
0
January 22nd, 2013 04:00
Enable dynamic_rdf option on Meta Head only.
sauravrohilla
859 Posts
1
January 22nd, 2013 05:00
starting with code 5875, all hypers by default have this flag enabled.
regards,
Saurabh Rohilla