Where can I set NTP (Network Time Protocol) for ECC6.1

I'm not sure what exactly you are trying to get synched up with NTP, but unless I'm misunderstanding you should be setting this at the OS level on your hosts. ControlCenter is going to pick up the time from the host OS it is running on.

Hi,

This is setup on the OS time (Date & Time properties). But it's a good practice to setup NTP on all your servers in your environment. If you don't have any external NTP source, pick 1 or 2 servers that will act as a NTP server and bind all ther other NTP client on those 2.

Also, many places use the network devices as a NTP source.

But for sure, there is no NTP related configuration in ECC by itself

Sebastien

Hi,

Thank you very much for the advice. Meaning ECC will reference to only local OS time but not reference to any other external NTP server in the network.

I have already sync up the time for the host, just not sure whether ECC application itself have any parameter need to set to point to NTP server in the network.but now i know it is reference back to its local time.

Thank you