Unsolved
This post is more than 5 years old
111 Posts
0
416
June 24th, 2008 02:00
StorageScope report of mapped devices
Hi,
I'm using StorageScope Version 5.2.0.5.0.
I've created a new layout that shows devices from a specific DMX that are mapped and unmasked.
Columns I used for this report:
According to the help pages:
The problem I'm seeing is that some devices are shown correctly. They are shown as "Mapped?" = Yes and have a "# Ports" > 0.
However some devices appear as "Mapped?" = Yes, and "# Ports" = 0.
How is this possible?
'symdev show' on the problematic devices actually confirm that the devices are NOT mapped.
This behavior is seen several DMX's.
Bug?
I'm using StorageScope Version 5.2.0.5.0.
I've created a new layout that shows devices from a specific DMX that are mapped and unmasked.
Columns I used for this report:
* Array
* Array Device Name
* Array Device Type
* Assignable Device Capacity (GB)
* Assignable Device Capacity - Raw (GB)
* User-defined Device Capacity - Usable (GB)
* User-defined Device Capacity - Raw (GB)
* Mapped?
* LUN Masked?
* # Ports
According to the help pages:
Mapped?
Description
Indicates if the array device is mapped to a front-end port
# Ports
Description
Number of ports
The problem I'm seeing is that some devices are shown correctly. They are shown as "Mapped?" = Yes and have a "# Ports" > 0.
However some devices appear as "Mapped?" = Yes, and "# Ports" = 0.
How is this possible?
'symdev show' on the problematic devices actually confirm that the devices are NOT mapped.
This behavior is seen several DMX's.
Bug?
No Events found!
seamuscoffey
472 Posts
0
October 6th, 2008 04:00
Has this issue been resolved? If not, I'd suggest opening a SR with the Support Center.
Regards,
Séamus Coffey
EMC Global Services