Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

R

RRSiemers

19 Posts

538

August 29th, 2008 10:00

Storagescope freespace report by tier

We have 3 tiers of storage in our environment that we would like to report freespace against.

My pain point is figuring out how to distuingish between Tier2 Fibre Channel storage and Tier3 ATA storage as they are enclosed in the same Clariion frame.

I currently have an Array report showing the "Arrays Unassigned Configured" + ("Arrays Unconfigured"*0.85) = Freespace, however it is the sum of all disk and and I need to know how much of that is ATA or FC.

Any ideas? Thanks in advance!

RRSiemers

19 Posts

August 29th, 2008 11:00

I think I figured it out partailly. I have clariion and IBM DS4500s in my Tier 2 storage report, the problem is that the IBM hardware is managed by the SMI agent and isnt collecting much more than the array tables. The type of information I need is found is raid group or disk type tables with appear blank for the IBM stuff. Its pretty easy to create 2 reports with just Array + Raid Group, and filter each by raid group disk type, resulting in 1 clariion ATA report and 1 clariion Fibre Channel disk report.

Is there any way to have both on the same report? Such as collumns of Clariion Name, ATA GB Free, FC GB free?

RRR

2 Intern

 • 

5.7K Posts

September 10th, 2008 13:00

Uhmmmm

Was this post helpful?

View All

No Events found!

Top