This post is more than 5 years old
1 Rookie
•
36 Posts
0
668
November 21st, 2006 07:00
SMI Agents with ECC 5.2 SP4
Hello,
which agent is the best to discover and manage Clariion Boxes, Clariion agent or SMI agent ?
I'm running ECC 5.2 SP4, my clariion boxes are running flare code 6.19 or 6.22(CX3).
Thank you
Fox
which agent is the best to discover and manage Clariion Boxes, Clariion agent or SMI agent ?
I'm running ECC 5.2 SP4, my clariion boxes are running flare code 6.19 or 6.22(CX3).
Thank you
Fox
No Events found!
GlenH
141 Posts
0
November 21st, 2006 13:00
As a general rule, you are always better off using the specific array agent compared to the SMI.
In your case. the Clariion agent will give you significantly more information and features compared with the SMI agent so it's definately the way to go.
As you are at 5.2 SP4 and have a CX3, then you need to get patch 3691 from powerlink and apply it to your ecc infrastructure first.
Good Luck,
Glen.
fox2_b90627
1 Rookie
•
36 Posts
0
November 22nd, 2006 01:00
I have allready the CX3 patch and It works perfectly.
Thank's a lot
Fox
michaelf1
109 Posts
0
November 27th, 2006 16:00