Unsolved
This post is more than 5 years old
7 Posts
0
602
January 12th, 2009 08:00
Problem during 6.1 install
I realized after I completed the install of 2 of my infrastructure servers that some of the components are running on the backup network. My servers are multihomed with a prod and backup connection and all of the components should be running on the prod interfaces but they were apparently split between the two during installation. I selected the backup interface as the secondary during installation and this was clearly a mistake.
Is there a way for me to change the interface associated with the following services listed as agents: Console, MasterAgent, Tomcat, Web Application, StorageScope Repository?
Thanks,
John
Is there a way for me to change the interface associated with the following services listed as agents: Console, MasterAgent, Tomcat, Web Application, StorageScope Repository?
Thanks,
John
No Events found!
seamuscoffey
472 Posts
0
January 13th, 2009 05:00
Leave this one with me for now - not sure if this can be easily remedied by changing the NIC binding order or if something else is required.
I'll ping a few people here...
Regards,
Séamus Coffey
EMC Global Services
seamuscoffey
472 Posts
1
January 13th, 2009 12:00
I've discussed this with one of the engineering team. If we understand this correctly, all you should need to do is rearrange the NIC binding order on the server in question so that the production NIC is at the top of the list.
Failing that you might need to open a SR as a Support Engineer might need to carry out a thorough investigation of your ControlCenter environment.
Regards,
Séamus