Unsolved
This post is more than 5 years old
1 Message
0
452
February 21st, 2008 11:00
MLR520 Host Agent For Linux
I have a Linux host running 2.4.21.47 update 7. SAN admins pushed MLR520 Host Agent for Linux. Lpfc driver lpfcdkms-7.1.14-3. Host is configured with CX700 drives. We have added DMX luns to this host, on reboot we are seeing only CX700 luns, for some reason it is not showing any DMX luns SAN admins says zoning is fine etc. etc. Any suggestions?
No Events found!
michaelf1
109 Posts
0
April 13th, 2008 20:00
admins pushed MLR520 Host Agent for Linux. Lpfc
driver lpfcdkms-7.1.14-3. Host is configured with
CX700 drives. We have added DMX luns to this host, on
reboot we are seeing only CX700 luns, for some reason
it is not showing any DMX luns SAN admins says
zoning is fine etc. etc. Any suggestions?
Has this been resolved? Have you considered opening a service request to have it worked (unless you haven't already done so).
SKT2
2 Intern
•
1.3K Posts
0
April 14th, 2008 12:00
symmask -sid xxx set hba_flags on V -disable -wwn yyyyyyyyyyyyyyy -dir 13d -p 0