This post is more than 5 years old
2 Intern
•
146 Posts
0
813
August 26th, 2010 11:00
Is it possible to change the %Full alert threshold for the SAV Devices 90% Full Alert?
I would like ECC to alert when our SAV Pool is 70% full verses the default of 90%. Does anyone know if it is possible to change this?
ECC > Alert Templates > Storage Agent for Symmetrix > Alarms > symm > "SAV Devices 90% Full Alert"
Thanks.
No Events found!
youngp2
90 Posts
0
September 3rd, 2010 08:00
Hi Vincent
Unfortunately that particular alert is only a true or false alert so it is coded to only fire at 90%. You can set what severity it should appear as when it does fire however.
I agree that this would be a useful function and will pass it along to our engineers. However to make it more official please submit an enhancement request from Powerlink. This is what development uses when designing the next release of the product.
From Powerlink
1. Navigate as follows: Support>Request Support>Contact EMC
2. Select Software product enhancement request in the Subject drop down and click Submit.
3. Accept the Disclaimer and proceed to the form.
Regards
Paul Young