Unsolved
This post is more than 5 years old
3 Posts
0
1179
February 27th, 2013 13:00
How to discover a device that is NAT'd
I've been working with Ionix for a bit, but consider myself new. I need to discover a device that is NAT'd outside of our network. It doesn't seem to want to discover, although I can ping and snmpwalk it from the ampm server. Has anyone done this, and what are the tricks?
No Events found!
JosephPresselle
1 Message
0
February 28th, 2013 18:00
Check to make sure that there is an IP Tag group for the managed IP address that you need to discover, and an exclusion list for all of the overlapping IP addresses on the LAN interfaces of the other devices that may be in conflict.
HockeyWeasel
27 Posts
0
March 4th, 2013 11:00
Hello,
Smarts does not supported NAT. K/B emc253638.
Although not what you want to hear, but I hope this answers your question.
Please let me know if there is anything else I can help you with. !
Regards,
Shahin Tajalli (TJ)
Smarts Global Support Engineer