This post is more than 5 years old
34 Posts
0
5577
August 13th, 2008 13:00
Forward SNMP traps tp HP OV NNM without Integration package
Hi All,
We have ECC 6.0 in our environment and we are planning to send the SNMP traps to HPOV NNM, but our event management team is hesitant about installing the integration package. So, we are looking for a possible scenario to achieve the trap forwarding without installing the integration package.
Can anybody help me with this?
Thanks a lot,
Sri
Message was edited by:
sriwithfbl
We have ECC 6.0 in our environment and we are planning to send the SNMP traps to HPOV NNM, but our event management team is hesitant about installing the integration package. So, we are looking for a possible scenario to achieve the trap forwarding without installing the integration package.
Can anybody help me with this?
Thanks a lot,
Sri
Message was edited by:
sriwithfbl
No Events found!
seamuscoffey
472 Posts
0
August 14th, 2008 09:00
As Allen pointed out, the specific Integration Packages are for interpreting the traps and probably makes them nice and readable once they get to the framework side.
I'm not sure how the traps will look on the NNM side without it's specific integration package installed...
Regards,
Séamus Coffey
EMC Global Services
RRR
2 Intern
•
5.7K Posts
0
August 14th, 2008 00:00
seamuscoffey
472 Posts
0
August 14th, 2008 01:00
EMC recommends integration of HP OpenView Network Node Manager (NNM) via the official integration package - I personally have not come across any instance of a CC/NNM integration without using the Integration Gateway/configuration files that are bundled with the Integration Packages.
Regards,
Séamus Coffey
EMC Global Services
sriwithfbl
34 Posts
0
August 14th, 2008 08:00
Allen Ward
4 Operator
•
2.1K Posts
1
August 14th, 2008 08:00
sriwithfbl
34 Posts
0
August 14th, 2008 08:00
When I create a management policy and drag the SNMP box, I am not being allowed to enter the IP Address. Is it possible in 5.2 or is there some other procedure to send the traps.
sriwithfbl
34 Posts
0
August 14th, 2008 08:00
I was wondering if we just installed the gateway agent without installing the Integration Package, will it send the ConnUnitEvent trap?
Thats all we need, since this trap reports the alerts.
Allen Ward
4 Operator
•
2.1K Posts
1
August 14th, 2008 09:00
sriwithfbl
34 Posts
0
August 14th, 2008 11:00
That answers my question, I will try testing it on virtual server and make sure.
Message was edited by:
sriwithfbl
JPP2
50 Posts
0
May 3rd, 2010 12:00
We have a similar situation. But, when I use "Notify SNMP", it is disabled and i can't enter the IP nor is it populated with the one that I specified during Integration gateway install.
How can we turn this on?
We have currently ECC 6.1.
thanks in advance,
Julia P.
surabhi_suman
14 Posts
0
July 25th, 2011 01:00
Hi,
I have configured ECC 6.1 to send snmp traps to NNMi host and I am getting all the alerts.But my problem is I am getting all the active alerts and no notification when the alerts are closed.
Could any one help me on this?
Thanks
Surabhi Suman
himankhare
3 Posts
0
February 17th, 2012 05:00
Hi Julia,
The IP address which you had specified during installation of gateway is sufficient. When you create managment policy and put notify SNMP in that policy, it will not show any IP address. It will automatically use the IP which you had sepcified earlier. So No worries. It will work just fine.
Thanks,
Himanshu Khare
seamuscoffey
472 Posts
0
February 20th, 2012 23:00
Hi Surabhi,
This is expected behaviour - ControlCenter will only populate alerts/traps on the framework via the Gateway Agent. There will not be any notification sent to the framework if the alert is subsequently deleted in ControlCenter.
Regards,
Seamus Coffey
Ionix Support