This post is more than 5 years old
1 Rookie
•
102 Posts
0
675
July 27th, 2010 14:00
ECC6.1ub5
Hi All, Reacently i have installed a new WLA agent on a server to share the load with old agent as we are building new servers everyday.When i openup the performance analyzer its not showing the hosts that are assigned to new agent.Can anyone post the procedure to map the analyzer to the new data.
Thank you.
No Events found!
popeye2
18 Posts
0
August 10th, 2010 18:00
OK, since your new ENW instance is fine (i.e. given that there are WLA collections taking place here), then the next thing to try and eliminate is corruption in the "providers.xml" files. If you delete these, they will be recreated when restarting the Performance Manager GUI.
So try renaming the "providers.xml" files in each of the archives folder of each ENW instance (as specified in the "archives location" parameter in the ENW.ini files). Then restart the the Performance Manager GUI and see if the issue is resolved.
If the problem persists, then I recommend raising a service request with EMC support at that point. An investigation such as this could become inefficient over a forum thread.
Kind Regards,
Louie Cavaliere.
EMC Global Services.
popeye2
18 Posts
0
July 28th, 2010 18:00
Hello,
The "MO Archiver Remap Utility Technical Notes" document is of interest here. It contains the details on how to use this utility to control the mapping of managed objects across WLA archivers.
It is available on Powerlink, and for your convenience I have uploaded a copy to this forum. Please follow the link below:
https://community.emc.com/docs/DOC-7851?uploadSuccess=true
Louie Cavaliere
Ionix Global Services
praveen56
1 Rookie
•
102 Posts
0
August 10th, 2010 12:00
Hi Louie, My question is not about mapping the objects its about why perf analyzer GUI is not showing the objects managed by new agent.
FYI.. When i go into new wla agent report directory i'm seeing all the new objects managed by this new agent.
Thank you.