Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

VerizonEd

21 Posts

558

March 6th, 2008 15:00

ECC 6.0 and Web Console Issue

Upon installing 6.0 today as well as the Web Console, when I start the web console I get the ominous 'unknown' in place of the version. On 5.2 this was always a matter of the ECCAPI server services not running. I have checked it on 6.0 and it looks fine. None of the logs in /temp prove to be useful at this time , any thoughts, ideas, or possible patches required that I have forgotten ?


Thanks !!!

VerizonEd

21 Posts

March 7th, 2008 06:00

Thanks for the reply, but I have checked the files and they are fine, let me explain the situation, this is a complete new install, not an upgrade. A question, does the WebConsole Server service need to be running on the actual ECC Server or does it run on any server within the infrastructure, for example:

ecc01 - ECC Server
ecc02 - Storage Scope Server
ecc03 - Web Console Server

So even though most of the core services run on ecc01 I should be able to launch the WebConsole via the command http://ecc03:7070/eccweb ??

VerizonEd

21 Posts

March 7th, 2008 08:00

Ok ..I have fixed it and the result is that you must have the web console running from the same server that the ECC Server service is running on along with the ECCAPI Server Service.

Was this post helpful?

View All

No Events found!

Top