Unsolved
This post is more than 5 years old
65 Posts
0
1158
July 15th, 2010 01:00
Disk usage report in SYMMETRIX.
My boss wanted to check the available disk space in 'symmetrix'. I used the 'ECC Storage Scope' to generate the ARRAY report.
Here's the hyperlink of the report.
Is possible to generate usage report like in CLARiiON? Which shows the free disks informations and the disks RAID id.
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
July 15th, 2010 03:00
Umesh,
you might get a faster response in Ionix (ECC) section of support forums:
ECN > Support Forums > Ionix
youngp2
90 Posts
0
July 19th, 2010 09:00
Hi Umesh
For some reason the corporate filter will not let me access the link you posted. If you can email me the reports I can look into this more for you.
young_paul@emc.com
Regards,
Paul Young
Global Services
Lars4_bf562a
46 Posts
0
July 30th, 2010 02:00
Hi
Not an answer to you question but more of a FYI note. As you can see your array ending with 018 hits a "boundary" at 50K. So if your StorageScope Array.pdf report contains arrays with more than 50K of any metric it will not be reported correctly in the array StorageScope report (the graph part).
/Lars