Deleting Active zoneset from a Cisco VSAN

You can do it using fabric manager ;

To delete a VSAN and its attributes using Fabric Manager, follow these steps

Select All VSANs from the Logical Domains pane.
Right-click the VSAN that you want to delete and select Delete Row from the drop-down menu .
You see a confirmation dialog box.

Click Yes to confirm the deletion or No to close the dialog box without deleting the VSAN.

Also you will have delete using ECC, the delete will not be an option if you are using the default VSAN like VSAN0001 ,

BTW , i recommend moving your Ques. to the connectivity section...

Hmm.. Thx for that
But I'm talking about deleting the ZoneSet rather than the VSAN.
Is it only possible to do so from FabricManager and not the ECC?

It is in fact a ZoneSet in the Default VSAN [0001]

I never use ECC for fabric and switch managment but i recommend using a command ,,,

--------------------------------------------------------------------------------
Note Clearing a zone set only erases the full zone database, not the active zone database.
--------------------------------------------------------------------------------
Clearing the Zone Server Database
To clear the zone server database, use the clear zone database command.

switch# clear zone database vsan 2

I think I deleted the zone server database from the Fabric Manager, but how do I get rid of the active zoneset?

   # no zoneset activate name SW07_Zone_Set VSAN 1

That is the command?

If so, I think I did this also from the FM, but however this doesn't show in the ECC.
There I can still see the zoneset with the dummy zone I created.

EDIT:
Hmmm... looks like it did work, no active Zoneset in the ECC. Only the [last active] under the 'Planned Zone Sets' folder. I wish to dispose of that one as well, but it's not that important. If anyone knows how, I'd appreciate it.

Maxim

Message was edited by:
MaximUnited