Unsolved
This post is more than 5 years old
4 Posts
0
938
April 20th, 2015 23:00
EMC Discovery Manager Client Configuration
Hi,
Is there a way to change the default location of the Messages folder within the client?
The client is installed in C:\ProgramData\.... and the messages folder is within that path.
I would like to relocate the messages folder to c:\users\%username%\....
Regards,
Arnaud
No Events found!
RKatwal
2 Intern
•
600 Posts
0
April 23rd, 2015 18:00
Greetings,
I am not aware of any way to achieve what you want to achieve. May I ask why do you want to do it ? The reason to ask this question is because it is a very small install file, users cannot use this application unless they are added to Discovery Manager users lists.
Thanks,
Rajan
hybridsol
4 Posts
0
April 23rd, 2015 23:00
Hi Rajan,
I made an Appv-5 sequence of the client, which works perfectly. But I cannot write to the location so I'd like to change the location to for example the userprofile.
Regards,
Arnaud
RKatwal
2 Intern
•
600 Posts
1
April 23rd, 2015 23:00
Hi Arnaud,
If you could wait for some time, new release of SourceOne is scheduled to be released. That will have web interface for discovery manager. Then you would not need to install anything on client side. Still for now thick client will be there too. Unfortunately engineering didn’t publish switches for DM install directory.
Best regards,
Rajan
hybridsol
4 Posts
0
April 24th, 2015 00:00
Hi Rajan,
Thank you very much for your answer!
I will stick to the full client and will not use Appv-5 for the time being.
Regards,
Arnaud