Unsolved
This post is more than 5 years old
2 Intern
•
138 Posts
0
1308
July 31st, 2008 23:00
Question about Dynamic Model for Smart Experts
Hello Smarts GURU
I have to realize the next issue:
We have device, that not figured in emc smarts discovery types.
So, now, needs to poll this device for an special OID and should to compare value with threshold and if threshold is High|Low, then to do notification to EMC Smarts.
This is not standard device, is UPS management card with not standard MIB file.
Anybody tried to realize this issue?
1. So I should to create my own Class and SNMP instrument or can I use exist Class for this task?
2. How can I change thresholds from the Pooling and Threshold Console, only for this device or group of devices?
3. How can I change Pooling time and more standard options, only for this device or group of devices
4. How can I enable trace of this Pooling , i wanna see the value that arrives from snmpget.
May be do you have examples with realized task like this, please attache it ...
Smarts version:
AM-PM 7.x
SAM 7.X
A lot of thanks!
I have to realize the next issue:
We have device, that not figured in emc smarts discovery types.
So, now, needs to poll this device for an special OID and should to compare value with threshold and if threshold is High|Low, then to do notification to EMC Smarts.
This is not standard device, is UPS management card with not standard MIB file.
Anybody tried to realize this issue?
1. So I should to create my own Class and SNMP instrument or can I use exist Class for this task?
2. How can I change thresholds from the Pooling and Threshold Console, only for this device or group of devices?
3. How can I change Pooling time and more standard options, only for this device or group of devices
4. How can I enable trace of this Pooling , i wanna see the value that arrives from snmpget.
May be do you have examples with realized task like this, please attache it ...
Smarts version:
AM-PM 7.x
SAM 7.X
A lot of thanks!
No Events found!
Christian4
30 Posts
0
August 25th, 2008 07:00
Did you have any luck on this issue?
Regards,
Christian
kfosburg
1 Rookie
•
18 Posts
0
August 25th, 2008 08:00
Adding classes and attributes is easy... adding instrumentation and notifications is not.
Karl
TCorcoran
53 Posts
0
August 25th, 2008 10:00
kfosburg
1 Rookie
•
18 Posts
0
August 25th, 2008 10:00
Karl
Hemulll
2 Intern
•
138 Posts
0
August 25th, 2008 20:00
I found this site with emc smarts examples
http://www.ifountain.com/blog/Smarts+Dynamic+Model%3A+Instrumentation+voodoo
kfosburg
1 Rookie
•
18 Posts
0
August 26th, 2008 07:00
In my testing, I have used examples from three different SMARTS tutorials plus the ifountain information and found many of the bits of information to be contradictory... It seems that version 6.x versus 7.x have different methodologies for instrumenting. Either that or the documentation is just different.
BTW, his 3rd party products (RapidInsight, RapidCMDB, etc...) are excellent add-ons to SMARTS!!!
Karl
Hemulll
2 Intern
•
138 Posts
0
August 26th, 2008 19:00
Yes, exactly so, this site has many contradictory.
Currently I found ASL advanced training and Develop Training, but can't share it here, because Dev training on Paper only and ASL take 700 Mb.
But I think after my learning of this documentation I will share my examples here, because all that touches EMC smarts Model and Dynamic Model have no good examples and explanations.
Christian4
30 Posts
0
August 26th, 2008 23:00
Where have you found the trainings? Do you have a link?
Regards,
Christian
Hemulll
2 Intern
•
138 Posts
0
August 27th, 2008 00:00
My colleague from my company was in EMC course and share it with me, but it is EMC confidential and proprietary information.