Problem with Cisco card status

We are running Smarts V9.0.0.4/64

This happens on many Cisco devices, but I have one case I'm looking at currently.

The device is a Cisco 6509

OID .1.3.6.1.4.1.9.1.283

A card device shows up as critical.

CARD-DEVICE1/1.2.1 [WS-X6066-SLB-APC 4 ports SLB Application Processor Complex Rev. 1.9/5000-2]    WS-X6066-SLB-APC 4 ports SLB Application Processor Complex Rev. 1.9/5000    CRITICAL

However an snmpwalk of the device shows that the real status of the card is poweredDown.

.1.3.6.1.4.1.9.9.117.1.2.1.1.2.5000 = 15

Therefore it should not be causing an alert.

Is there a way to adjust that without Unmanaging the card?