IP-AM Can't Make Chassis Object.

Hi,

This device is not in the last certification list published by EMC for Smarts 7.0.1.
I guess this is quite a new Cisco device but since it's Cisco it will be certified (I guess) in the next SP or mayor release.
You can also open a certification request with EMC support or even certify the device yourself using a similar device to certify it or standard mibs.
Yo can find the certification files in powerlink.emc.com
Home > Support > Technical Documentation and Advisories > Software ~ S ~ Documentation > Smarts Family > Smarts IP Management Suite > Certification Files

Sending a device certification:
http://knowledgebase.emc.com/emcice/documentDisplay.do;jsessionid=4D488B57F6A56643F3C0E343B21FA424?docType=1006&clusterName=DefaultCluster&resultType=5002&groupId=1&page=&docProp=$solution_id&docPropValue=emc110117&passedTitle=null

cerifying a device:
http://knowledgebase.emc.com/emcice/documentDisplay.do?docType=1006&clusterName=DefaultCluster&resultType=5002&groupId=1&page=&docProp=$solution_id&docPropValue=emc109147&passedTitle=null

i hope this helps

cheers

Fernando

Hi.

Thank you for your reply.

I checked the certificated lists.
In the lists,there are the device named "4948G-L3".
I think It means Catalyst 4948G-E,is it wrong?

P.S.
This list is useful and helpful .

Thank you.
--
Katsuhiko

Hi,

Well, I don't know for sure if there are the same type of device.
Yo must check the OIDs of both devices, you should have both since you have your device discovered and the one in the certification list.
If the OIDs are different you can certify your device manually until EMC releases a new certification.
Follow the instructions on the 2nd link in my previous reply in order to certify a device

cheers

Fernando

I found this for ou, i don't know if u solved your problem

but there are at least 2 types of 4948

Cisco Catalyst 4000 Series
4948 OID: 1.3.6.1.4.1.9.1.626


4948-10GE3 OID: 1.3.6.1.4.1.9.1.659

the one certified is:

Cisco 4948G-L3 Switch .1.3.6.1.4.1.9.1.626 IP-6.2-SP3

so if you have the 4948-10GE3 OID: 1.3.6.1.4.1.9.1.659 you should send a certificartion to SMARTS and cerity it manually in oid2type_Field

cheers

Fernando

Thank you Fernando!!

I use 4948-10GE3 .

I had been adviced the way of manual certification in oid2type file by the EMC support.
And I'm trying it now.

Hi,

Glad to hear!!!!

keep on using the forum

cheers

Fernando