Ionix(Smart 8.1.1) Threshold setting for individual device

Question

HI There,

We seen that threshold can be set for all router devces at one shot, Suppose if client wants to set up a different thresholds for all Router devices then is it possible to set up a threshold for individual device also in Smarts?

Regards,

Shweta

FredericMeunier_0588be · Accepted Answer

In this case, you will have 10 groups with only one device per group. Still possible. It's the reconfigure task which applies polling and thresholds settings to managed object (to instrumentation in fact), so there is no other solution from what I know. If you change the value manually in the instrumentation object, this will be changed again by the next reconfigure.

== Monitor your Smarts environment using APG Solution Pack for Ionix ==
Frederic Meunier
Solutions Watch4Net Inc
APG & Smarts InCharge integration
http://www.watch4net.com

FredericMeunier_0588be · Answer

Hi,

can you use an existing attribute to filter this specific device and create a group (in Polling and Thresholds) associated with this filter ? This should answer your needs.

--Fred

== APG5 ReportPack4Event for Smarts can report on millions of notifications in seconds ==
Frederic Meunier
Solutions Watch4Net Inc
APG & Smarts InCharge integration
http://www.watch4net.com

Shwetcs · Answer

Thanks freed Suppose if we have 10 devices and all are having different attribute and different thresholds then this not going to help right?

Smarts

Ionix(Smart 8.1.1) Threshold setting for individual device

Was this post helpful?