Unsolved
This post is more than 5 years old
1 Message
0
633
May 1st, 2014 13:00
External Event Correlation using Escalations & Perl Scripts
Has anybody done something like this with in SAM 9.x
Manual correlation based on per site events. We want to correlate many alerts under
one single alert based on site.
a. For example, a power outage occured in a site that effected 10 switches, we want
to be able to correlate these 10 switches down alert under just one alert called
multiple switches down under site X
b. For example, site X primary link to Internet has been pegged or heavily utilized,
this in turn will create an interface high utilization alert and various IPSLA and QoS
alerts. We want to be able to correlate the IPSLA and QoS alerts under just the
high utilization alert rather then have separate 20 alerts.
No Events found!
CPerfetto
29 Posts
1
May 2nd, 2014 10:00
KottolliArun - Responds:
One way to do this will be do use dynamic modelling.
In case-1: If the power is supplied by an intelligent UPS, which supports SNMP traps, then using user defined connections in dynamic model, one can create user defined event correlations.
Similarly, other models can be created using dynamic modelling in Smarts