This post is more than 5 years old
32 Posts
0
388
January 31st, 2008 03:00
Explain please sense MaxUpTime in Performance manager
You could find MaxUpTime in PM SystemResourceGroup -> Connectivity
No Events found!
This post is more than 5 years old
32 Posts
0
388
January 31st, 2008 03:00
Top
Dinand1
89 Posts
0
January 31st, 2008 04:00
it has to do with the sysuptime varbind in a snmp trap of type cold/warm start ...
MaxUpTime will control whether if the device is send to the device pending list so it's rediscoved just in case there are any changes, like new interfaces ...
if you want a proper explanation refer to:
IP Management Configuration guide.pdf - chapter 2-30
i hope this helps
cheers
F.