Unsolved
This post is more than 5 years old
4 Posts
0
432
February 27th, 2011 00:00
EMC Ionix temperature reading
Hi,
We are having very comprehensive SMARTS environment, however for some reasons we aren't able to see the temperature on a switch.
I checked with the MIB, and the MIB is providing the temperature information, as well as APM discovers the Temperature Sensor, however still it doesn't show the actual reading for temperature
No Events found!
Christian4
30 Posts
0
February 28th, 2011 21:00
Hello
Are you sure you have a suitable instrumentation object available for this temperatur sensor? Must be somewhere under the topology, e.g Router->ComposedOf->TemperatureSensor->InstrumentedBy->TemperatureInstrumentation.
If not check polling groups.
If yes, IONIX/SMARTS is reading from the wrong MIB tree. You could arrange/correct this with dynamic modeling. Let me know if there is a need to do it with dynamic modeling. I could help you on this issue.
What kind of device is it? I could also check in our environment if this type of device is available.
Best regards,
Christian