Unsolved
This post is more than 5 years old
1 Message
0
907
September 12th, 2014 10:00
Which ESRS to use VNX5300's (HQ & DR) and one VNX5400 (HQ)?
We have VNX5300's both at HQ and DR site with embedded ESRS. Recently, we added a VNX5400 block only. Is ESRS stand-alone required for the VNX5400? Recommended? Can the stand-alone be used in place of the embedded ESRS on the VNX5300's?
No Events found!
Manabu_Ito
94 Posts
0
September 12th, 2014 18:00
Hello
VNX Gen2 (VNX5400) latest OE (05.33.000.5.074) is supported for Embedded ESRS on Storage Processor
https://support.emc.com/docu54807_VNX_Operating_Environment_for_Block_05.33.000.5.074_and_for_File_8.1.3.72,_EMC_Unisphe…
The OE is released a few days ago!!! so you have 2 choises to manage ESRS but recommend you to upgrade OE.
(1) ESRS GW (v2 or v3) or ESRS IP CLient for VNX --> requries dedicated workstation
(2) Embedded ESRS on SP --> Storongly recommended due to no workstaion required but required to upgrade OE.