Unsolved
21 Posts
0
1228
April 18th, 2020 20:00
SA-9035 : Monitoring capability cannot be verified because the SNMP trap desti
SA-9035 : Monitoring capability cannot be verified because the SNMP trap destination is not configured on the device. Remediation : You must either try to configure the SNMP settings through the Tasks > Configure SNMP option or manually configure the SNMP settings. For instructions to manually configure the SNMP settings, see "Manually configuring SNMP settings" in the Online Help or Users Guide. How can I fix this problem.
No Events found!
H20man
3 Posts
0
April 24th, 2020 10:00
1. Make sure the Port you are using for SNMP is open on your firewall and will allow access between SupportAssist and the iDrac(s) you are trying to access.
2. Confirm the settings for SNMP are matched on both ends.
--Is the SNMP setup on SupportAssist already? What settings are configured there?
--Is the SNMP setup/enabled on the iDrac? What settings are configured there?