Unsolved
1 Message
0
182
June 19th, 2023 01:00
Query on SCG system requirements - 2x Enterprise servers and 36x Global Access servers
Hi All,
Customer wants to know why we need 36 Global Access servers to be added ?
Anyone can help provide the reason/justification to support this requirement ?
What's the risk/exposure if they only add half of the list provided?
During implementation, some Global Access servers were rejected by their security team due to the URL category listed as N.A during their security evaluation scanning.
Thanks.
No Events found!
DELL-Charles R
Moderator
•
4.5K Posts
0
June 19th, 2023 06:00
Hello YKC888
I hope this can help you:
Network requirements page 17-19, 28
https://dell.to/445RaFl
The local system must be able to connect to the following Enterprise servers through ports 443 and 8443
The local system must be able to connect to the following Global access servers through ports 443 and 8443
443* HTTPS Outbound from local system to Dell Supports communication from secure connect gateway to Dell. It is required for secure connect gateway registration, product alerts, and remote support.
8443* MQTT over TLS Outbound from local system to Dell Used for remote support, pub/sub, and inventory syncing.
* Required—these port must be open on the local system.
I would note internal Dell personnel are recommended to use their internal resources and not the DCF.