This post is more than 5 years old
5 Posts
0
901
November 24th, 2009 13:00
Getting started with Replication Manager
I'm new to EMC storage and trying to get up to speed with Replication Manager,
in particular for use with our database and e-mail backups. Reading up on the
Admin and Product Guides, it looks like I need the following software components
installed on the production and mount hosts (both Solaris),
- EMC Solultions Enabler (multithreaded)
- EMC CLARiiON Navisphere Agent
- EMC Navisphere Secure CLI (not required on VMware virtual hosts)
- EMC Admsnap
So far I've been able to pull down the Solutions Enabler (7.1) and the Replication
Manager 5.2 (and SP2) off the Powerlink Support Downloads menu, but I'm not
seeing the other components. Wondering if some these are included with the
SE or RM kits, if not, any pointers as to where I can find them?
Thanks.
John
AranH1
2.2K Posts
0
November 24th, 2009 15:00
If the downloads don't show up after your sites have been registered send an email to powerlink@emc.com and request access to those areas of Powerlink. Sometimes the downloads aren't enabled for new accounts.
Aran
AranH1
2.2K Posts
0
November 24th, 2009 14:00
John,
You will find the Navisphere Agent and CLI at this location:
Support > Software Downloads and Licensing > Downloads J-O > Navisphere Server Software
And the SnapView Admsnap at this location:
Support > Software Downloads and Licensing > Downloads S > SnapView
jmeyers1
5 Posts
0
November 24th, 2009 15:00
Will do. Thank you!
jmeyers1
5 Posts
0
November 24th, 2009 15:00
Thanks for the tip Aran, that's where I was looking for them. Looking at this a bit
more, it looks like we haven't registered our site id yet, which is probably why the
items aren't there. I just did the "Register your Software Sites" option, so hopefully
the items will show up shortly. Thanks for confirming that is indeed the correct
location.
John