Unsolved
This post is more than 5 years old
2 Posts
0
943
May 3rd, 2011 06:00
Autostart Issues
Hello to all,
I ve been trying to setup Autostart 5.3 SP3 in 2 windows 2008 servers x64 R2 and I ve been facing some problems.
1. Although I have all my NIC's installed and I can ping them when i try to nbtstat it i cannot see my Ip address of the mirror and the heartbeat NIC. In the autostart I see them alive.
2. Although I can "see" my mirror drives in the EMC Mirroring Data Source when I try to apply the new data source I get an error called "Failed to manage D: Driver result : 259, No more data is available"
Any suggestions?
Thanks in advance
George
No Events found!
Stephanie_P
180 Posts
0
May 3rd, 2011 07:00
Hi, We'll move this discussion to the Support Forums Community where it can be addressed.
Thanks,
Stephanie
RFritz11
2 Intern
•
244 Posts
0
May 3rd, 2011 07:00
Hi, We've moved this discussion to the Support Forums replication Community where it should be addressed. Thanks!
ggiannopoulos
2 Posts
0
May 3rd, 2011 07:00
Ok Stephanie.
Thanks
ecervant
63 Posts
0
May 3rd, 2011 08:00
I would start by trying the EMC AutoStart 5.3.4 as per the following support solution:
http://solutions.emc.com/emcsolutionview.asp?id=esg110338
If that doesn't do the trick, then I would suggest the following:
http://solutions.emc.com/emcsolutionview.asp?id=esg100479
There are also a few other support solutions with that message available on Powerlink. Let us know your results.