Skip to main content
Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

drozz

77 Posts

1391

October 23rd, 2007 07:00

026150 ERROR:Function dcClarSVGetNumSessions failed

I have an SQL job that creates local clones, SAN Copies them to a DR site with Clones attached to the replicas. I snap the Replicas every evening.

Yesterday I had to add a File System LUN to the SQL job for a total of 5 LUNs in the job. 4 SQL and 1 File System. The run through all the operations just fine but last nights SnapShot failed with this error. 026150 ERROR:Function dcClarSVGetNumSessions failed. I tried to recreate the job but to no avail.

Any insight to this issue would be great
Thanks

JamesBEMC

257 Posts

October 25th, 2007 00:00

Hey Drozz

If the filesystem is not an active part of your SQL Database, what steps did you do in order for RM to include the filesystem also?

This means you have a mixed appset and I dont know how valid that actually is.

drozz

77 Posts

October 24th, 2007 12:00

This error is being investigated but it seems not to many people have a file system replication included in the SQL job. If I hear anything I will post immediately.

Thanks

drozz

77 Posts

October 25th, 2007 14:00

Yes That's what support told me. They said it isn't specifically mentioned in the "Can Nots" but isn't mentioned in the "Cans" either. I spilt the job off and it's fine.

The odd thing to me was the clone, replication and dr clone set were fine. Just the snap failed everytime. It looked like it thought it had a session open and couldn't find it.

Oh well, my system goes full on production so the config fun is coming to a close anyway.

Thanks Again

JamesBEMC

257 Posts

October 25th, 2007 23:00

Ahh - one thing - this is a long shot

Check on the DR Clariion that for each of the DR target clones (what a mouth full) does not have a "half" snapshot.

I mean a left over snapshot session without a snapshot name or vica versa.
Delete it, run an array discovery on the remote DR array and go again.

James.

drozz

77 Posts

October 30th, 2007 07:00

I tried this and it still thinks it should be attaching to a session for the file system

2007 10 29 13:11:47 phsrv34 INFO:This operation can take a long time. Please be patient.
2007 10 29 13:12:50 phsrv34 001564 INFO:Need storage for 5 source device residing on Clariion APM00012345678.
2007 10 29 13:12:50 phsrv34 001566 INFO:Storage Policy will consider 56 device(s) from the entire Replication Manager database.
2007 10 29 13:12:50 phsrv34 001568 INFO:After removing 17 in use devices, 0 devices that are not visible on the mount host and 37 devices that are the wrong storage type, there are now 2 devices being considered for this replica.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1028 is paired with replication device clariion_APM00012345678_phsrv34-1028-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1030 is paired with replication device clariion_APM00012345678_phsrv34-1030-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1033 is paired with replication device clariion_APM00012345678_phsrv34-1033-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1031 is paired with replication device clariion_APM00012345678_phsrv34-1031-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1029 is paired with replication device clariion_APM00012345678_phsrv34-1029-178080.
2007 10 29 13:12:53 phsrv40 INFO:Replication validation The volumes for this replication are all on basic disk.
2007 10 29 13:13:06 phsrv40 000343 ERROR:Solutions Enabler function ClarDevShow failed with return code 7. Error message: The device name specified could not be found.
2007 10 29 13:13:06 phsrv40 INFO:dcClarSVGetNumSessions: Success.
2007 10 29 13:13:06 phsrv40 026150 ERROR:Function dcClarSVGetNumSessions failed.
2007 10 29 13:13:06 phsrv40 026084 ERROR:Storage Services operation Validate failed with an error as follows: Storage Services has terminated with an error.
2007 10 29 13:13:06 phsrv34 026420 ERROR:An unexpected internal error occurred: IRD: ValidateFailed failed.
------------------------------------------------------------
This device doesn't exist and it thinks it should apparently. I deleted all my clone sets for this job, deleted and redefined the job and get the same exact errors.

If I remove the file system snap, it works fine.

2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1033 is paired with replication device clariion_APM00012345678_phsrv34-1033-178080.

Message was edited by:
KCSPam
Removed serial number information.

drozz

77 Posts

October 30th, 2007 07:00

I tried this and it still thinks it should be attaching to a session for the file system

2007 10 29 13:11:47 phsrv34 INFO:This operation can take a long time. Please be patient.
2007 10 29 13:12:50 phsrv34 001564 INFO:Need storage for 5 source device residing on Clariion APM00012345678.
2007 10 29 13:12:50 phsrv34 001566 INFO:Storage Policy will consider 56 device(s) from the entire Replication Manager database.
2007 10 29 13:12:50 phsrv34 001568 INFO:After removing 17 in use devices, 0 devices that are not visible on the mount host and 37 devices that are the wrong storage type, there are now 2 devices being considered for this replica.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1028 is paired with replication device clariion_APM00012345678_phsrv34-1028-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1030 is paired with replication device clariion_APM00012345678_phsrv34-1030-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1033 is paired with replication device clariion_APM00012345678_phsrv34-1033-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1031 is paired with replication device clariion_APM00012345678_phsrv34-1031-178080.
2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1029 is paired with replication device clariion_APM00012345678_phsrv34-1029-178080.
2007 10 29 13:12:53 phsrv40 INFO:Replication validation The volumes for this replication are all on basic disk.
2007 10 29 13:13:06 phsrv40 000343 ERROR:Solutions Enabler function ClarDevShow failed with return code 7. Error message: The device name specified could not be found.
2007 10 29 13:13:06 phsrv40 INFO:dcClarSVGetNumSessions: Success.
2007 10 29 13:13:06 phsrv40 026150 ERROR:Function dcClarSVGetNumSessions failed.
2007 10 29 13:13:06 phsrv40 026084 ERROR:Storage Services operation Validate failed with an error as follows: Storage Services has terminated with an error.
2007 10 29 13:13:06 phsrv34 026420 ERROR:An unexpected internal error occurred: IRD: ValidateFailed failed.
------------------------------------------------------------
This device below doesn't exist and it thinks it should apparently. I deleted all my Snap sets for this job, deleted and redefined the job and get the same exact errors.

If I remove the file system snap, it works fine.

2007 10 29 13:12:53 phsrv34 INFO:Original device clariion_APM00012345678_1033 is paired with replication device clariion_APM00012345678_phsrv34-1033-178080.

Message was edited by:
KCSPam
Removed serial number inforamtion.

JamesBEMC

257 Posts

October 31st, 2007 01:00

Its "open a Support Case" time I am afraid Drozz.

What version of RM? :-)
Are you trying to use consistent split in the options of the job?
If so, trying removing that and try again.

James.

drozz

77 Posts

November 5th, 2007 09:00

Thats OK. We went production with the file system job split off. Thanks Again!

Was this post helpful?

View All

No Events found!

Top