Unsolved
This post is more than 5 years old
1 Rookie
•
12 Posts
0
3691
December 10th, 2018 07:00
WARNING: Custer xxxxxx detected that resource pool N/A on array N/A was removed
Hi All,
I have received the below warning message on a RP appliance.
I tried to upgrade the cluster from 4.1.SP1 to 4.1.SP3 and the upgrade failed because of this warning.
Any idea how to resolve?
Many thanks,
Bobby
No Events found!
Idan
3 Apprentice
•
675 Posts
0
December 11th, 2018 05:00
Hi Bobby,
Not sure what splitter we're talking about here but have you tried to remove any stale resource pool you have under the registered array in the storage tab ?
If this is not applicable (storage doesn't show up under storage tab, etc.), I would open a SR so that we'll be able to take a closer look at the reason we're presenting this warning.
Hope that helps,
Idan
Bobby Petrov
1 Rookie
•
12 Posts
0
December 11th, 2018 05:00
Hi Idan,
It is a VNX and I have tried to remove the resource pool under the registered array in the storage tab, however without any luck.
The first time I actually did it, RPA1 rebooted, then on the next two occasions the cluster was loosing access for a moment and then was coming back.
Would you recon that if I detach and re-attach the RPs would help?
Thanks for your time.
Regards,
Bobby
Idan
3 Apprentice
•
675 Posts
0
December 12th, 2018 02:00
Hi Bobby,
I would recommend to open a SR for us to take a closer look.
Regards,
Idan