Unsolved
This post is more than 5 years old
1 Rookie
•
53 Posts
0
1264
January 4th, 2018 07:00
vRPA (Classic) Configuration with Unity
Hi Team,
I have configured vRPA (Classic) with unity (iSCSI). I have Received splitter down errors on both site vRPAs. Please advise.
Unity has 10G dual ports (LC) I/O Module (Port 0, Port1) and I have registered the vRPA with four ports on each site.
vRPA classic version 5.1
Regards,
MAwais
No Events found!
forshr
2 Intern
•
1.1K Posts
1
January 4th, 2018 13:00
Have you tried using higher ports. I'm concerned that the ports that you have used, specifically port 0, may be the default array based replication port.
Regards,
Rich
MAwais
1 Rookie
•
53 Posts
0
January 4th, 2018 13:00
Hi Rich,
Thank you so much for your output, I have attached only one 10G dual ports I/O module and I am using both ports of each SP.
This error automatically disappear.
so what do you suggest should I use the port one (I/O Module Port 1) of I/O module instead of both for each SP.
Regards.
MAwais
forshr
2 Intern
•
1.1K Posts
0
January 5th, 2018 01:00
So port 0 is still in use and the error has disappeared?
MAwais
1 Rookie
•
53 Posts
0
January 5th, 2018 07:00
yes, it's using both Ports (Port 0 and Port 1) of I/O Module 0 but sometimes error on PR site cluster and sometimes on DR site cluster and automatically appeared and disappeared.