Upgrading RPA version from 3.5 to 4.1 along with change in version SE to EX

Hi Ivan,

Is the RP SE upgrade and the license change to SE to EX on separate RP system?

Regards,

Rich

Hi Rich,

Do you have any supporting doc that can equip me with all the pre and post task before upgrade along with the steps to follow during upgrading the RPA.

It’s the first time upgrade on RPA for me.

Regards,

Ivan Skinner

HCL - Novelis| Storage

Email:- ivansk@hcl.com

Hi Ivan,

Thanks for clarifying.

So on this basis the RP system will need to be converted from RP/SE to RP in order for the RP/EX license to be applied. The upgrade can happen prior or post the conversion.

Regards,

Rich

Hi Rich,

We are planning to upgrade the same RPA from 3.5 to 4.1 along with we will perform license upgrade from SE to EX as we are in process of integrating VPLEX in our environment.

Regards,

Ivan Skinner

HCL - Novelis| Storage

Email:- ivansk@hcl.com

All deployment related activities relating to RecoverPoint, which includes upgrading, can be found in the RecoverPoint Installation and Deployment Guide. I'd also recommend that you check out the latest RecoverPoint Installation and Deployment Release Notes. These docs can be found under RecoverPoint->Documentation at EMC Online Support.