Unsolved
This post is more than 5 years old
7 Posts
0
557
October 9th, 2015 12:00
Upgrade from 4.1.1.1 to 4.1.2.1
I was going to upgrade our RecoverPoint clusters, but when reading the upgrade documentation I was looking for some clarification on what needs to be done to upgrade the VNX splitters. I couldn't find any documentation on what needs to be done for this.
"The upgrade procedure does not upgrade the VNX or VNXe splitters. A RecoverPoint
environment can simultaneously support splitters from two adjacent major releases (for
example, a 4.0.SP1 environment can support both a 4.0.SP1 splitter and a 3.5.SP1
splitter); however, EMC strongly advises you to upgrade splitters to the same RecoverPoint
release to gain the latest splitter functionalities and features."
No Events found!
fadliz
153 Posts
0
October 12th, 2015 07:00
Is this an RP/SE env? Or is EMC performing the upgrade.
Upgrading the VNX splitters – depends on what Flare/OE levels you’re on. Please check the RN.
Thx,
Zahid Fadli
EMC2
Mobile: +17347170033
Twitter: @zDataGuy
From: mkozak
Reply-To: "jive-843579832-ot9-2-ji23@emc-ecn.hosted.jivesoftware.com "
Date: Monday, October 12, 2015 at 10:01 AM
To: Zahid Fadli
Subject: - Upgrade from 4.1.1.1 to 4.1.2.1
ECN
Upgrade from 4.1.1.1 to 4.1.2.1
created by mkozak in RecoverPoint - View the full discussion
mkozak82
7 Posts
0
October 12th, 2015 07:00
It is a RP/SE environment and we'll be doing the upgrade. This is a fairly new installation and I'm not familiar with all the acronyms. How would I find what Flare/OE level.